O-1 Is an oil-hardening steel with high surface hardness after hardening, resistance to shrinking and warping and good machinability. Typical analysis is; Carbon 0.9 – 1.0%, Silicon 0.2-.35%, Manganese 1.0-1.15%, Chromium 0.40-0.60%, Tungsten 0.45-0.60%, O-1 Is used in applications requiring sharp cutting edges, wear resistance and machinability.
Arquivos do Blog
=1/8″ HOLES–16 GA. (1/16″ ) 304 STAINLESS PERFORATED SHEET –6-3/8″ X 11-3/8″=
304 STAINLESS PERFORATED SHEET. 1/8″ HOLES ON 3/16″CENTERS. 16 GAUGE (1/16″ THICK)–.0598.
Lead Sheet 1/16 Inch x 12 Inch x 24 Inch Roll 99.9 Percent Pure for Crafting
Easy to shape and cut — ideal for crafting and custom applications. It’s 99.9%+ pure lead, rolled into a convenient 12″ x 24″ sheet that you can cut to your exact needs. – Material or Type: 99.9%+ Pure Lead, Sheet Form.
110 Copper Bar H02, 1/16″ Thick x 5/8″ Wide x 12 Inch Length
Temper: 1/2 Hard (H02). Alloy 110 Copper, Unpolished. Thickness: 1/16″. Thickness Tolerance: +/-.004″.
1-1/8 X 3-1/2 X 12″ O-1 Tool Steel DCF Plate Saw Cut Oversize
O-1 Is an oil-hardening steel with high surface hardness after hardening, resistance to shrinking and warping and good machinability. Typical analysis is; Carbon 0.9 – 1.0%, Silicon 0.2-.35%, Manganese 1.0-1.15%, Chromium 0.40-0.60%, Tungsten 0.45-0.60%, O-1 Is used in applications requiring sharp cutting edges, wear resistance and machinability.
3/4 X 8 X 12″ O-1 Tool Steel DCF Plate Saw Cut Oversize
O-1 Is an oil-hardening steel with high surface hardness after hardening, resistance to shrinking and warping and good machinability. Typical analysis is; Carbon 0.9 – 1.0%, Silicon 0.2-.35%, Manganese 1.0-1.15%, Chromium 0.40-0.60%, Tungsten 0.45-0.60%, O-1 Is used in applications requiring sharp cutting edges, wear resistance and machinability.
1-1/8 X 2 X 12″ O-1 Tool Steel DCF Plate Saw Cut Oversize
O-1 Is an oil-hardening steel with high surface hardness after hardening, resistance to shrinking and warping and good machinability. Typical analysis is; Carbon 0.9 – 1.0%, Silicon 0.2-.35%, Manganese 1.0-1.15%, Chromium 0.40-0.60%, Tungsten 0.45-0.60%, O-1 Is used in applications requiring sharp cutting edges, wear resistance and machinability.
1-1/8″ SQUARE X 12″ 4140 Hot Rolled Annealed Plate Saw Cut Width+Length Oversize
For Sale: 4140 Hot Rolled Annealed Plate 1 Piece 1-1/8″ Thick X 1-1/8″ Wide X 12″ Length Width and Length Are Saw Cut Approx +1/16″ TO +1/8″ Oversize Approx weight is 5 lbs. The picture does not necessarily represent the item that you will get but they are similar. NOTE; As Surface Condition on Thickness is Hot Rolled it is NOT ADVISABLE TO TRY TO FINISH MACHINE ON SIZE FROM SIZE PURCHASED. Standard Machining Allowance must be removed off the Hot Rolled Surface Condition to be free from decarborization, seams, laps, tears or cracks and other defects exposed to the machined surfaces. Typical Analysis; Carbon .38% -.43%, Manganese 0.75-1.00%, Chromium .80%-1.10%, Molybdenum .15%-.25% Typical applications include; Spindles, Rods, Shafts, Studs, Axles, Arbors, Gears, Machine Parts, Inexpensive Tooling, Short Run Stamping Dies. Note; We do not ship via US Mail / We don’t ship to a PO Box. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other Sizes & Surface Conditions Including; CF Annealed, HR Heat Treated & TGP Heat Treated.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4142PH, A-6, M-2, Low Carbon & other grades. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 cold finished bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted.
6061 T6 Aluminum Bar, 1/16″ Thick x 1 1/2″ Wide x 12″ Length, 8 Units
6061 T6 Aluminum Bar, 1/16″ Thick x 1 1/2″ Wide x 12″ Length, 8 UnitsThickness Tolerance +/-.006″Width tolerance ±0.014″. Length tolerance is ±1″.6061 Alloy has better corrosion resistance and weldability than Alloys 2024 and 7075, but it’s not as strong. It is nonmagnetic, heat treatable, and resists stress cracking. Temperature range is -320° to 300° F.Yield Strength: 35,000 psiHardness: 80 BrinellASTM B221 Aluminum Bars are not film or protective masked and may have scuffs or scratches. RETURN’S Where we are at fault. Item not as described, damaged or an obvious error on our part is guaranteed a full refund, inclusive of any & all shippingper our stated directions. RETURN DIRECTION’s; All returns MUST be in the original condition received. All returns MUST be shipped in the same manner as we shipped originally. ANY ADDITIONAL COST UP & BEYOND THE ORIGINAL COST, INCURRED IN RETURNING YOUR ITEM IS NOT REFUNDABLE. (if you choose to return an item at a higher rate than we originally shipped to you? This portion is NOT refundable) Refunds due because of a no error on our part are completed asan item refund only. Shipping is excluded. PLEASE feel free to contact us with any questions or concerns, as we strive for 100% satisfaction & happy customers. Items with a free shipping 20% restocking fee will apply.
1-1/8 X 1-1/2 X 12″ O-1 Tool Steel DCF Plate Saw Cut Oversize
O-1 Is an oil-hardening steel with high surface hardness after hardening, resistance to shrinking and warping and good machinability. Typical analysis is; Carbon 0.9 – 1.0%, Silicon 0.2-.35%, Manganese 1.0-1.15%, Chromium 0.40-0.60%, Tungsten 0.45-0.60%, O-1 Is used in applications requiring sharp cutting edges, wear resistance and machinability.