Arquivos do Blog

3/4 X 4 X 12″ H-13 Tool Steel DCF Plate Saw Cut Oversize

For Sale: H-13 Tool Steel Decarb Free Annealed Plate; 1 Piece; 3/4″ Thick X 4″ Wide X 12″ Length, Thickness is either Ground OR Milled, Approx +.015″ / +.045″ Oversize, Width and Length are Saw Cut Nominally Oversize Approx +1/16″ TO +1/8″ Can be finished machined to 3/4″ Thick X 4″ Wide X 12″ Length The picture does not necessarily represent the item that you will get but they are similar. Approx weight is 11 Pounds. H-13 Is an air-or oil-hardening tool steel noted for extreme toughness and good red hardness. Typical analysis is; Carbon 0.37%, Silicon 1%, Manganese 0.35%, Chromium 5.25%, Molybdenum 1.30%, Vanadium 1% H-13 Is used mostly in hot tooling applications, although it is used in cold work applications where other steels tried have broken in use. Typical applications include; Aluminum Extrusion Dies, Bending Dies, Die Casting Dies, Forging Dies, Plastic Mold Dies, Die Casting Inserts, Hot Work Punches, Extrusion Press Liners. NOTE; We don’t ship via U.S. Mail. / We don’t ship to a PO BOX. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other sizes and lengths.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4140 Annealed / 4142PH, A-6, M-2, Low Carbon & other grades Inch & METRIC Sizes. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 Cold Finished Bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted / Contact us for all your Steel needs.

1 X 3 X 12″ H-13 Tool Steel DCF Plate Saw Cut Oversize

For Sale: H-13 Tool Steel Decarb Free Annealed Plate; 1 Piece; 1″ Thick X 3″ Wide X 12″ Length, Thickness is either Ground OR Milled, Approx +.015″ / +.045″ Oversize, Width and Length are Saw Cut Nominally Oversize Approx +1/16″ TO +1/8″ Can be finished machined to 1″ Thick X 3″ Wide X 12″ Length The picture does not necessarily represent the item that you will get but they are similar. Approx weight is 11 Pounds. H-13 Is an air-or oil-hardening tool steel noted for extreme toughness and good red hardness. Typical analysis is; Carbon 0.37%, Silicon 1%, Manganese 0.35%, Chromium 5.25%, Molybdenum 1.30%, Vanadium 1% H-13 Is used mostly in hot tooling applications, although it is used in cold work applications where other steels tried have broken in use. Typical applications include; Aluminum Extrusion Dies, Bending Dies, Die Casting Dies, Forging Dies, Plastic Mold Dies, Die Casting Inserts, Hot Work Punches, Extrusion Press Liners. NOTE; We don’t ship via U.S. Mail. / We don’t ship to a PO BOX. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other sizes and lengths.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4140 Annealed / 4142PH, A-6, M-2, Low Carbon & other grades Inch & METRIC Sizes. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 Cold Finished Bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted / Contact us for all your Steel needs.

5/8 X 3 X 12″ H-13 Tool Steel DCF Plate Saw Cut Oversize

For Sale: H-13 Tool Steel Decarb Free Annealed Plate; 1 Piece; 5/8″ Thick X 3″ Wide X 12″ Length, Thickness is either Ground OR Milled, Approx +.015″ / +.045″ Oversize, Width and Length are Saw Cut Nominally Oversize Approx +1/16″ TO +1/8″ Can be finished machined to 5/8″ Thick X 3″ Wide X 12″ Length The picture does not necessarily represent the item that you will get but they are similar. Approx weight is 7 Pounds. H-13 Is an air-or oil-hardening tool steel noted for extreme toughness and good red hardness. Typical analysis is; Carbon 0.37%, Silicon 1%, Manganese 0.35%, Chromium 5.25%, Molybdenum 1.30%, Vanadium 1% H-13 Is used mostly in hot tooling applications, although it is used in cold work applications where other steels tried have broken in use. Typical applications include; Aluminum Extrusion Dies, Bending Dies, Die Casting Dies, Forging Dies, Plastic Mold Dies, Die Casting Inserts, Hot Work Punches, Extrusion Press Liners. NOTE; We don’t ship via U.S. Mail. / We don’t ship to a PO BOX. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other sizes and lengths.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4140 Annealed / 4142PH, A-6, M-2, Low Carbon & other grades Inch & METRIC Sizes. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 Cold Finished Bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted / Contact us for all your Steel needs.

1 X 2 X 12″ H-13 Tool Steel DCF Plate Saw Cut Oversize

For Sale: H-13 Tool Steel Decarb Free Annealed Plate; 1 Piece; 1″ Thick X 2″ Wide X 12″ Length, Thickness is either Ground OR Milled, Approx +.015″ / +.045″ Oversize, Width and Length are Saw Cut Nominally Oversize Approx +1/16″ TO +1/8″ Can be finished machined to 1″ Thick X 2″ Wide X 12″ Length The picture does not necessarily represent the item that you will get but they are similar. Approx weight is 8 Pounds. H-13 Is an air-or oil-hardening tool steel noted for extreme toughness and good red hardness. Typical analysis is; Carbon 0.37%, Silicon 1%, Manganese 0.35%, Chromium 5.25%, Molybdenum 1.30%, Vanadium 1% H-13 Is used mostly in hot tooling applications, although it is used in cold work applications where other steels tried have broken in use. Typical applications include; Aluminum Extrusion Dies, Bending Dies, Die Casting Dies, Forging Dies, Plastic Mold Dies, Die Casting Inserts, Hot Work Punches, Extrusion Press Liners. NOTE; We don’t ship via U.S. Mail. / We don’t ship to a PO BOX. We Will Ship Via UPS Up To 70 Pounds Max Weight Per Package. – If you need to order over 70 Pounds then send us a message so we can then provide you with best Pre-Paid Freight Shipping Cost and most practical way to ship. *** Also available in a full range of other sizes and lengths.*** Low prices on all grades of precision ground stock; O-1, A-2, D-2, S-7, 4140 Annealed / 4142PH, A-6, M-2, Low Carbon & other grades Inch & METRIC Sizes. All available as standard or oversize. Flat ground stock produced up to 120″ long. NESSteel Inc. “The One Stop Steel Shop” For all your steel and metal requirements No minimum order, great prices. Stocking – Tool, Carbon, Mold, Alloy and High Speed Steels. All sizes of 1018 Cold Finished Bar. Flat ground stock in all grades – Standard & Special Sizes In house Blanchard Grinding to 60″ and Surface grinding to 120″ Paypal and all credit cards accepted / Contact us for all your Steel needs.

6061 T6 Aluminum Bar, 1/16″ (.062″) Thick x 5/8″ Wide x 72″ Length, 8 Units

6061 T6 Aluminum Bar, 1/16″ (.062″) Thick x 5/8″ Wide x 72″ Length, 8 pcsThickness Tolerance +/-.006″Width tolerance for 1/4″ to 1 3/4″ wide bars is ±0.014″. Width tolerance for 2″ to 5″ wide bars is ±0.034″. Width tolerance for 6″ to 12″ wide bars is ±0.084″. Length tolerance is ±1″.6061 Alloy has better corrosion resistance and weldability than Alloys 2024 and 7075, but it’s not as strong. It is nonmagnetic, heat treatable, and resists stress cracking. Temperature range is -320° to 300° F.Yield Strength: 35,000 psiHardness: 80 BrinellASTM B221 Aluminum Bars are not film or protective masked and may have scuffs or scratches. RETURN’S Where we are at fault. Item not as described, damaged or an obvious error on our part is guaranteed a full refund, inclusive of any & all shippingper our stated directions. RETURN DIRECTION’s; All returns MUST be in the original condition received. All returns MUST be shipped in the same manner as we shipped originally. ANY ADDITIONAL COST UP & BEYOND THE ORIGINAL COST, INCURRED IN RETURNING YOUR ITEM IS NOT REFUNDABLE. (if you choose to return an item at a higher rate than we originally shipped to you? This portion is NOT refundable) Refunds due because of a no error on our part are completed asan item refund only. Shipping is excluded. PLEASE feel free to contact us with any questions or concerns, as we strive for 100% satisfaction & happy customers. Items with a free shipping 20% restocking fee will apply.