2″ x 3″ x 1/4″ Wall Aluminum Square Tube 6061 Aluminum Length Tolerance +/- 1/8″ Please ask about other sizes or custom lengths Thank you for looking!
Arquivos do Blog
5052 H32 Aluminum Bar, 1/4″ (.250″) Thick x 3.0″ Wide x 24″ Length
5052 H32 Aluminum Bar, 1/4″ (.250″) Thick x 3.0″ Wide x 24″ LengthThickness Tolerance +/-.015″Width tolerance ±0.034″. Length tolerance is ±1″. Temper: H32 (1/4 Hard)ASTM B209 Aluminum Bars are not film or protective masked and may have scuffs or scratches. RETURN’S Where we are at fault. Item not as described, damaged or an obvious error on our part is guaranteed a full refund, inclusive of any & all shippingper our stated directions. RETURN DIRECTION’s; All returns MUST be in the original condition received. All returns MUST be shipped in the same manner as we shipped originally. ANY ADDITIONAL COST UP & BEYOND THE ORIGINAL COST, INCURRED IN RETURNING YOUR ITEM IS NOT REFUNDABLE. (if you choose to return an item at a higher rate than we originally shipped to you? This portion is NOT refundable) Refunds due because of a no error on our part are completed asan item refund only. Shipping is excluded. PLEASE feel free to contact us with any questions or concerns, as we strive for 100% satisfaction & happy customers. Items with a free shipping 20% restocking fee will apply.
6061 Aluminum Rectangle Tube 2″ x 3″ x 9″ Length x 1/4″ Wall (0.250″ Wall)
2″ x 3″ x 1/4″ Wall Aluminum Square Tube 6061 Aluminum Length Tolerance +/- 1/8″ Please ask about other sizes or custom lengths Thank you for looking!
6061 Aluminum Rectangle Tube 2″ x 3″ x 8″ Length x 1/4″ Wall (0.250″ Wall)
2″ x 3″ x 1/4″ Wall Aluminum Square Tube 6061 Aluminum Length Tolerance +/- 1/8″ Please ask about other sizes or custom lengths Thank you for looking!
6061 Aluminum Rectangle Tube 2″ x 3″ x 5″ Length x 1/4″ Wall (0.250″ Wall)
2″ x 3″ x 1/4″ Wall Aluminum Square Tube 6061 Aluminum Length Tolerance +/- 1/8″ Please ask about other sizes or custom lengths Thank you for looking!
6061 Aluminum Rectangle Tube 2″ x 3″ x 12″ Length x 1/4″ Wall (0.250″ Wall)
2″ x 3″ x 1/4″ Wall Aluminum Square Tube 6061 Aluminum Length Tolerance +/- 1/8″ Please ask about other sizes or custom lengths Thank you for looking!
0.010” Stainless 302 Shim Stock 6” x 50” Roll Precision Brand 22320, 22L10
0.010” Stainless 302 Shim Stock 6” x 50” Roll Precision Brand 22320, 22L10 New surplus in torn box. I have measured the shim and you get 6” x 50” x 0.010” ( full roll) You get thirty days right to return if you’re not happy 😃
Shim Stock Plastic 1″ wide X 0.013″ thick 4″+ long 3 piece lot Fast Shipping
You are purchasing THREE (3) pieces of plastic shim stock, each piece is 4″+- long 1″+- wide and a thickness of 0.013 ( .013) Shipped with USPS 5767-ss 02-01-23
Similar Cerro/Bolten Cerrotru Alloy 281 Bismuth Tin Metal 2″ Ball @ 1.3 pounds
LM281 HAS A MELTING POINT OF 281F. THIS ALLOY IS MADE OF PURE TIN AND BISMUTH MAKING IT A MORE ENVIRONMENTALLY FRIENDLY ALTERNATIVE TO HALLMARK’S LM158 THE CERROBEND TYPE 158F. THIS ALLOY LM281 IS MADE UP OF PURE TIN AND BISMUTH. This is NOT re-melt, or scrap. YOU ARE GETTING A 2″ BALL THAT WEIGHS 1.3 POUNDS EACH THIS LOW MELTING TEMPERATURE ALLOY EXPANDS AS IT SOLIDIFIES. EASY TO MACHINE AND TOOL. THEY ARE ALSO GOOD FOR REPAIRING DIES AND PATTERNS. IDEAL FOR CREATING FUSABLE LINKS AND HOLDING IRREGULAR AND CONTOURED PARTS DURING MACHINING. JUST MOLD THE ALLOY OVER THE COMPONENT, MACHINE AND MELT OFF THE ALLOY. ALSO USED IN TUBE BENDING. Density 0.3090 lb/in³Tensile strength Lbs/in² — 8000 The 2 inch ball weight is 1.3 Pounds. YOU ARE GETTING 1 POUND OF ALLOY FOR THIS PRICE. YOU WILL NEED TO PUT IN THE TOTAL POUNDS IN THE QUANITY BOX AT CHECK OUT FOR YOUR NEEDS. BALL MELTS AT 281 DEGREES-F AND CAN BE REMELTED OVER AND OVER FOR MULTIPLE USAGE. THIS METAL DOES NOT CONTAIN LEAD OR CADMIUM. PLEASE, ALWAYS USE GOOD HOUSEKEEPING PROCEDURES TO REDUCE DUST AND FUMES. WE ARE AN ALLOYING COMPANY AND THESE ARE MADE TO SPEC. WE MAKE SEVERAL LOW MELT ALLOYS. PLEASE E-MAIL WITH QUESTIONS.Shipping & HandlingS&H charges can be combined for multiple buys on our other items. Check them out.Please be advised orders over $30.00 are shipped with signature confirmation due to eBay regulations based on refunds of lost or stolen items. If you want to accept responsibility and not have signature confirmation please add to your notes at checkout to “Please send without signature confirmation”. Thank you for looking and please contact us with any questions. Our office is open Monday to Friday 8:00 to 4:00 EST. We do not work weekends. Your emails will be answered ASAP. On Apr-20-05 at 19:55:05 PDT, seller added the following information:
Similar Cerro/Bolten Cerrotru Alloy 281 Bismuth Tin Metal 2″ Ball @ 1.3 pounds
LM281 HAS A MELTING POINT OF 281F. THIS ALLOY IS MADE OF PURE TIN AND BISMUTH MAKING IT A MORE ENVIRONMENTALLY FRIENDLY ALTERNATIVE TO HALLMARK’S LM158 THE CERROBEND TYPE 158F. THIS ALLOY LM281 IS MADE UP OF PURE TIN AND BISMUTH. This is NOT re-melt, or scrap. YOU ARE GETTING A 2″ BALL THAT WEIGHS 1.3 POUNDS EACH THIS LOW MELTING TEMPERATURE ALLOY EXPANDS AS IT SOLIDIFIES. EASY TO MACHINE AND TOOL. THEY ARE ALSO GOOD FOR REPAIRING DIES AND PATTERNS. IDEAL FOR CREATING FUSABLE LINKS AND HOLDING IRREGULAR AND CONTOURED PARTS DURING MACHINING. JUST MOLD THE ALLOY OVER THE COMPONENT, MACHINE AND MELT OFF THE ALLOY. ALSO USED IN TUBE BENDING. Density 0.3090 lb/in³Tensile strength Lbs/in² — 8000 The 2 inch ball weight is 1.3 Pounds. YOU ARE GETTING 1 POUND OF ALLOY FOR THIS PRICE. YOU WILL NEED TO PUT IN THE TOTAL POUNDS IN THE QUANITY BOX AT CHECK OUT FOR YOUR NEEDS. BALL MELTS AT 281 DEGREES-F AND CAN BE REMELTED OVER AND OVER FOR MULTIPLE USAGE. THIS METAL DOES NOT CONTAIN LEAD OR CADMIUM. PLEASE, ALWAYS USE GOOD HOUSEKEEPING PROCEDURES TO REDUCE DUST AND FUMES. WE ARE AN ALLOYING COMPANY AND THESE ARE MADE TO SPEC. WE MAKE SEVERAL LOW MELT ALLOYS. PLEASE E-MAIL WITH QUESTIONS.Shipping & HandlingS&H charges can be combined for multiple buys on our other items. Check them out.Please be advised orders over $30.00 are shipped with signature confirmation due to eBay regulations based on refunds of lost or stolen items. If you want to accept responsibility and not have signature confirmation please add to your notes at checkout to “Please send without signature confirmation”. Thank you for looking and please contact us with any questions. Our office is open Monday to Friday 8:00 to 4:00 EST. We do not work weekends. Your emails will be answered ASAP. On Apr-20-05 at 19:55:05 PDT, seller added the following information: